Multiple Choice Questions on Production Technology
Multiple Choice Questions on Production Technology for Competitive Examinations. MCQ on Manufacturing Processes.
1- In which of the following types of casting methods, molten metal is forced into a permanent metal mould under pressure.
(A) Centrifugal casting
(B) Sand mould casting
(C) Die casting
(D) investment casting
2- The process by which metal is removed by rotating the cutter in the direction of travel of work piece, is known as.
(A) Saw milling
(B) Straddle milling
(C) Down milling
(D) Up milling
3- The process by which great pressure is applied to a heated metal billet or blank causing it to flow through a restricted orifice.
(A) Spinning
(B) Extrusion
(C) Forging
(D) Hot rolling
4- Small quantities of Sulphur is added to low carbon steels, to improve
(A) machinability
(B) weldability
(C) melting temperature
(D) all of the above
5- In a fusion welding process, ___ is used.
(A) only pressure
(B) only heat
(C) both heat and pressure
(D) none of the above
6- Following material is used for making consumable patterns
(A) Plaster of Paris
(B) Wax
(C) Polystyrene
(D) None of the above
7- In which of the following processes, no chip is produced?
(A) Honing
(B) Grinding
(C) Knurling
(D) Metal spinning
8- Following method has high material removal rate efficiency.
(A) Plasma Arc Machining
(B) Ultrasonic Machining
(C) Electro Discharge Machining
(D) Electron Beam Machining
9- The upper half of mold is known as
(A) Drag
(B) Flask
(C) Cope
(D) None of the above
10- The taper provided on the pattern for its easy removal from mold is known as ___ allowance.
(A) machining
(B) draft
(C) shrinkage
(D) distortion
11- Cold working of metal is done to improve its
(A) Tensile strength
(B) Yield strength
(C) Hardness
(D) All of the above
12- Following operation is performed on Lathe Machine.
(A) Honing
(B) Lapping
(C) Facing
(D) Gear cutting
13- Which one of the following is a metal removal process?
(A) Wire drawing
(B) Forging
(C) Extrusion
(D) Honing
14- Which of the following cutting tool is used to create internal threads?
(A) Reamer
(B) Tap
(C) Boring
(D) All of the above
15- Which of the following is Fusion welding process?
(A) Forge welding
(B) Ultrasonic welding
(C) Diffusion welding
(D) Laser-beam welding
16- Hot working of metal is carried out
(A) above 0°C
(B) above 100°C
(C) at melting point of the metal
(D) above re-crystallization temperature of metal
17- Following is the solid state joining process.
(A) Friction welding
(B) Shielded metal arc welding
(C) Gas tungsten arc welding
(D) All of the above
18- The machining of Cast iron will produce
(A) Discontinuous chips
(B) Continuous chips
(C) Continuous chips with built-up edge
(D) None of the above
19- Blowholes in sand casting are caused due to
(A) lower strength of solidified material
(B) poor casting design
(C) faulty moulding flask
(D) high moisture content in the moulding sand
20- In investment casting, ___ pattern is used
(A) Metallic
(B) Wooden
(C) Plastic
(D) Wax
ANSWERS:
1-(C), 2-(D), 3-(B), 4-(A), 5-(B), 6-(C), 7-(D), 8-(A), 9-(C), 10-(A), 11-(D), 12-(C), 13-(D), 14-(B), 15-(D), 16-(D), 17-(A), 18-(A), 19-(D), 20-(D)